LATHE ZMM CU 582 290x1500
Diameter up to 600 mm
lathe conventional - Used
ZMM
09415
Center height mm 290
Swing diameter on the bed mm 580
Swing diameter on the carriage mm 380
Bed width mm 400
Distance between centers mm 1500
Spindle bore mm 72
Spindle speed rpm 2000
Main motor power kW 7.5 (11)
Carriage stroke mm 315
Cross-slide stroke mm 130
Tailstock diameter mm 90
Quill cone Morse No.5
Quill stroke mm 230
EQUIPPED WITH:
-Self-centering chuck
-Turret with toolholders
USED MACHINE
09415
Center height mm 290
Swing diameter on the bed mm 580
Swing diameter on the carriage mm 380
Bed width mm 400
Distance between centers mm 1500
Spindle bore mm 72
Spindle speed rpm 2000
Main motor power kW 7.5 (11)
Carriage stroke mm 315
Cross-slide stroke mm 130
Tailstock diameter mm 90
Quill cone Morse No.5
Quill stroke mm 230
EQUIPPED WITH:
-Self-centering chuck
-Turret with toolholders
USED MACHINE
FILL OUT OUR FORM FOR MORE INFORMATION
Potrebbero interessarti
LATHE WALDEGG 550x1400
ZMM
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm...
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm...
LATHE GIOVANNI BREDA 305x3000
ZMM
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning...
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning...
LATHE MERLI CLOVIS 28
ZMM
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm...
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm...
.JPG)
LATHE GIANA 360x1800
ZMM
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM...
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM...
X
Invia tramite e-mail
X
Scarica PDF
Enter your email address to receive a link to download the PDF
Per poter procedere, la prima volta devi inserire i Tuoi dati
