DRILLING SERRMAC RAG 16/18
Column/bench type
drilling - Used
SERRMAC
09216
Drilling capacity on steel R50 mm ø 16
Spindle taper CM2
Spindle stroke mm 90
Spindle diameter mm 52
Column diameter mm 80
Distance between column and spindle center mm 210
Transmission Pulley
Spindle speed rpm 450 - 3.000
Motor power kW 0.55 / 220-380 V (1 speed) three-phase
USED MACHINE
09216
Drilling capacity on steel R50 mm ø 16
Spindle taper CM2
Spindle stroke mm 90
Spindle diameter mm 52
Column diameter mm 80
Distance between column and spindle center mm 210
Transmission Pulley
Spindle speed rpm 450 - 3.000
Motor power kW 0.55 / 220-380 V (1 speed) three-phase
USED MACHINE
FILL OUT OUR FORM FOR MORE INFORMATION
Potrebbero interessarti
DRILLING ADRIA MACHINE
SERRMAC
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical...
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical...
DRILLING SASS MOD.TM 2500
SERRMAC
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm...
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm...
.jpeg)
DRILLING SASS MOD. TM 80-2500
SERRMAC
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm...
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm...
DRILLING/TAPPING IMM 125
SERRMAC
09409
ON COLUMN
Taper C.M. 4
Quill stroke mm 110
Working plane mm 340x340
Distance between plane /...
09409
ON COLUMN
Taper C.M. 4
Quill stroke mm 110
Working plane mm 340x340
Distance between plane /...
.jpg)
COLUMN DRILLING POLI E MIGLIORINI
SERRMAC
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL...
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL...
X
Invia tramite e-mail
X
Scarica PDF
Enter your email address to receive a link to download the PDF
Per poter procedere, la prima volta devi inserire i Tuoi dati
